Publicidad
Idiomas disponibles
Idiomas disponibles
Carpet Cleaner
USER INSTRUCTIONS
HELPFUL THINGS TO THINK ABOUT BEFORE CARPET CLEANING:
1. Before cleaning, determine where to start and end, making sure not to walk
over previously cleaned area.
2. Do not over saturate carpet with cleaning solution while using Carpet
Cleaner.
3. For heavily soiled areas, additional applications may be necessary.
4. Allow plenty of time for carpet to dry completely.
5. Wipe cleaning solution from woodwork and wood to prevent damage.
6. Vacuum the carpet thoroughly and remove as much furniture from the room
as possible. For remaining pieces place foil or plastic under furniture legs
until the carpet has completely dried.
7. Check for color fastness before cleaning your carpet. Dampen a white cloth
with the cleaning solution and test a small inconspicuous area. Gently rub
over the area and all colors in the carpet. If the white cloth remains clean it
should be safe to clean your carpet.
8. NOTE: You may use any carpet cleaning solution available at your
local retail or hardware store. Pay close attention to the amounts
that should be used.
9. DO NOT use any chemicals on your carpeting. Only approved carpet cleaning
solutions.
TO BEGIN
1. Hold the handle and lift up on clean water release lever and left the water
tank away from the cleaner. Unscrew the tank cap from the bottom of the
tank, add 2 teaspoons of cleaning solution (or recommended amount on
cleaner solution bottle) and fill the remainder of the tank with warm tap
water. Do not fill past the MAX fill line.
2. Place the bottom of the tank into the Carpet Cleaner and snap into place.
3. Plug the power cord into an electrical outlet. Turn the Carpet Cleaner on
using the switch on the side.
4. Step on the handle release lever on the back of the Carpet Cleaner to lower
the handle into the cleaning position.
6
customer-service@wk-usa.com
User Instructions
AFTER SALES SUPPORT
888-367-7373
Publicidad
Capítulos
