First use
SAVE THESE INSTRUCTIONS
First use
Checking the carpet cleaner and package contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the carpet cleaner.
− For this reason, be very careful when opening it.
1. Take the carpet cleaner out of the packaging.
2. Check to make sure that the delivery is complete (see Fig. A and B).
3. Check whether the carpet cleaner or individual parts are damaged. If this
is the case, do not use the carpet cleaner. Contact the manufacturer via the
service address indicated on the warranty card.
Carpet cleaner assembly
CAUTION!
Risk of injury!
Improper handling of the carpet cleaner may cause injury.
− Do not plug the carpet cleaner in until it is fully assembled.
− Do not operate the carpet cleaner without the handle
being firmly screwed into place.
1. Set the carpet cleaner in an upright position.
2. Place the handle
cleaner.
3. Make sure that the power cord clip
the power cord hooks
4. Drive one Philips-head screw
and fasten them snugly.
12
1
firmly onto the main body of the carpet
12
.
14
into each side of the handle
16
is on the same side as