Emptying The Dirty Water Tank - Easy Home VC9389 Manual Del Usuario

Using the carpet cleaner
• Increased air circulation (open doors, fans, etc.) or the use of a dehumidifier
will help the carpet dry thoroughly and prevent the growth of mold or
mildew.
• Vacuum the carpet thoroughly before cleaning it and after it has dried.

Emptying the dirty water tank

CAUTION!
Risk of injury!
Improper handling of the carpet cleaner may cause injury.
− Always unplug the carpet cleaner before emptying the
dirty water tank.
− Never remove the guarding of a moving part. Failure to do
so could result in injury to persons and would defeat the
utility of the appliance.
An automatic shut-off device prevents the carpet cleaner from
picking up more dirty water than the dirty water tank can hold.
You will know the dirty water tank needs to be emptied when:
• the motor sound rises in pitch,
• you do not see dirty solution coming up through the dirty
• or the float inside the dirty water tank has risen to the top of
1. Unplug the carpet cleaner.
2. Unlock the dirty water tank
latch 8 and lifting up the dirty water tank handle
(see step 1).
3. Remove the dirty water tank from the carpet cleaner.
4. Open the dirty water tank cap
grip points to the word "unlock" (see step 2).
5. Empty the dirty water tank, replace the dirty water tank cap and turn it
to the "lock" position, and place the dirty water tank back into the carpet
cleaner (see step 3).
6. Push the dirty water tank handle down until the dirty water tank locking
latch clicks into place.
16
water tank lid,
the tank and is visible.
7 by pressing the dirty water tank locking
17 by turning it counterclockwise, so the
5 at the same time