Cleaning A Carpet - Easy Home VC9389 Manual Del Usuario

Cleaning a carpet

CAUTION!
Risk of injury!
Improper handling of the carpet cleaner may cause injury.
− Make sure that the float is installed correctly before any
wet pick-up operation.
• Before cleaning, determine where to start and stop, making
• Do not oversaturate the carpet.
• For heavily soiled areas, additional applications may
1. Plug the power cord
by switching the on/off switch
2. Step on the handle release pedal
cleaner into the cleaning position.
3. While pulling the solution release trigger
cleaner in a backwards direction towards you.
4. Release the solution release trigger and push the carpet cleaner forward
in the same path to agitate and remove dirty water and solution from the
carpet.
For heavily soiled areas, repeat as necessary.
5. To turn off the carpet cleaner, switch the on/off switch to the 0 position.
Tips for carpet cleaning
• Use a steady, moderate, forward and backwards motion.
• Always work from back to front across a room to avoid stepping on wet
carpet.
• Do not make the carpet too wet. Use no more than two sets of forward and
backward strokes while releasing solution. Always follow with dry strokes;
the more the better.
• Wipe any cleaning solution from woodwork and furniture to prevent any
damage.
• Allow plenty of time for the carpet to dry and avoid walking on it until it is
dry.
sure you will not walk over previously cleaned areas.
be necessary.
15 into an electrical outlet and turn it on
to the I position.
2
13 to lower the carpet
11 , pull the carpet
Using the carpet cleaner
15