Handsfree Calling (via BLUETOOTH
only)
To use a cellular phone, connect it with this unit. For
details, see "Preparing a BLUETOOTH Device"
(page 7).
Receiving a Call
1
Touch
when a call is received.
The phone call starts.
Note
The ringtone and talker's voice are output only from the
front speakers.
To reject/end a call
Touch
.
Making a Call
1
Press HOME, then touch [Phone].
2
Touch one of the call icons on the
BLUETOOTH phone display.
(call history)*
Select a contact from the call history list. The
unit stores the last 20 calls.
(redial)
Make a call automatically to the last contact
you made.
(phonebook)*
Select a contact from the name list/number
list in the phonebook. To search the desired
contact in alphabetical order from the name
list, touch
.
1
1
(voice command)*
Say a voice tag stored on the cellular phone.
(phone number input)
Enter the phone number.
Preset numbers (1 to 6)
Select the stored contact.
To store the contact, see "Presetting phone
numbers" (page 15).
*1 The cellular phone needs to support PBAP (Phone
Book Access Profile).
*2 Do not use the voice command function on the
cellular phone while it is connected to this unit.
*3 Voice command may not work depending on the
recognition specification of the cellular phone. For
details, visit the support site on the back cover.
3
Touch
.
The phone call starts.
Presetting phone numbers
You can store up to 6 contacts in the preset list.
1
In the phone screen, select a phone number
that you want to store in the preset dial
from the phonebook.
The confirmation display appears.
2
Touch [Preset], then the desired preset
number (1 to 6).
The contact is stored to the selected preset
number.
Available Operations During a
Call
To adjust the ringtone volume
Rotate the volume control dial while receiving a call.
To adjust the talker's voice volume
Rotate the volume control dial during a call.
To adjust the volume for the other party (Mic
gain adjustment)
During a handsfree call, touch
Gain] to [Low], [Middle], or [High].
To switch between handsfree mode and
handheld mode
During a call, touch
phone call audio between the unit and cellular
phone.
Note
Depending on the cellular phone, this operation may not be
available.
To answer an incoming call automatically
Touch
, then set [Auto Answer] to [ON].
2
*
3
, then set [MIC
to switch the
15
GB