Bluetooth Device - Sony XAV-W651BT Manual De Instrucciones

Ocultar thumbs Ver también para XAV-W651BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting with a smartphone by One
touch (NFC)
By touching the N-Mark on the unit with an NFC*
compatible smartphone, the unit is paired and
connected with the smartphone automatically.
* NFC (Near Field Communication) is a technology enabling
short-range wireless communication between various
devices, such as mobile phones and IC tags. Thanks to the
NFC function, data communication can be achieved easily
just by touching the relevant symbol or designated
location on NFC compatible devices.
For a smartphone with Android OS 4.0 or lower
installed, downloading of the app "NFC Easy
Connect" available at Google Play™ is required. The
app may not be downloadable in some countries/
regions.
1
Activate the NFC function on the
smartphone.
For details, refer to the operating instructions
supplied with the smartphone.
2
Touch the N-Mark part of the unit with the
N-Mark part of the smartphone.
Make sure that
lights up on the status bar of
the unit.
To disconnect by One touch
Touch the N-Mark part of the unit with the N-Mark
part of the smartphone again.
Notes
• When making the connection, handle the smartphone
carefully to prevent scratches.
• One touch connection is not possible when the unit is
already connected to another NFC compatible device. In
this case, disconnect the other device, and make a
connection with the smartphone again.
8
GB
Pairing and connecting with a

BLUETOOTH device

When connecting a BLUETOOTH device for the first
time, mutual registration (called "pairing") is
required. Pairing enables this unit and other devices
to recognize each other.
1
Place the BLUETOOTH device within 1 m (3
ft) of this unit.
2
Press HOME, then touch [Settings].
3
Touch
.
4
Touch [Bluetooth Connection], then set the
signal to [ON].
The BLUETOOTH signal is turned on and
up on the status bar of the unit.
5
Touch [Pairing].
flashes while the unit is in pairing standby
mode.
6
Perform pairing on the BLUETOOTH device
so it detects this unit.
7
Select [XAV-xxxx] (your model name) shown
in the display of the BLUETOOTH device.
If your model name does not appear, repeat
from step 5.
8
If passkey* input is required on the
BLUETOOTH device, input [0000].
* Passkey may be called "passcode," "PIN code," "PIN
number," "password," etc., depending on the
BLUETOOTH device.
Input passkey
[0000]
When pairing is made,
9
Select this unit on the BLUETOOTH device to
establish the BLUETOOTH connection.
or
lights up when the connection is made.
lights
stays lit.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Xav-v631bt

Tabla de contenido