Philips FW-R33 Guia De Inicio Rapido

Philips CDR Mini Hi-Fi System FW-R33/R55: Getting started...
General information
This Quick Installation Card gives a rough
overview and helps to quickly start with basic
steps. Please read the supplied instruction
manual for detailed information.
Power
1
Check whether the power voltage as shown on the
type plate corresponds to your local power voltage.
If it does not, consult your dealer or service
organization.
2
After all connections have been made, connect
the power cord to AC MAINS ~ and to the wall
power outlet.This switches on the power supply.
To disconnect the unit from the power
completely, remove the power plug from the wall
power outlet.
Plug and Play
When you switch on the power supply for the first
time, Plug and Play allows you to store all available
radio stations automatically.
1
Press É Å to start storing.
2
Storing stops when all available stations have been
stored or the memory for 40 presets is full.The last
stored radio station will be played.
R L
LINE
OUT
AUX/
CDR
IN
AM ANTENNA FM ANTENNA
SUBWOOFER
OUT
Discs for recording
Use discs with the "Digital Audio" logo only:
– CD-Audio Recordable (CDR) discs, or
– CD-Audio ReWriteable (CDRW) discs.
Do not use computer CDR(W)s as
recording will not work properly.
Discs for playback
disc:
finalized CDR
finalized CDRW
unfinalized CDR
or CDRW
MP3 CD
Note: MP3 playback works only if the file names end
with .mp3
Demonstration mode
The demonstration mode displays various features of
the unit and will start automatically.
To switch off the demonstration mode, keep Ç
0 0
pressed for at least 5 seconds.
AC
MAINS
~
playback standard
in: CD player compatible
CD player
The unit switches to standby.
1
8 m m
2
3
CDRW Philips CDR
Mini Hi-Fi
System