TIGEX OT240A Instrucciones De Uso página 7

1 ON/OFF button - Keep this button depressed for five seconds to switch on
2 Directional buttons
3 Loudspeaker
4 Operating / low battery indicator (LED 1)
5 Sound level indicator for baby's cries (LED 2, 3, 4, 5)
6 Button to enable/disable the screen display - Press this button to enable and disable the image display
7 Walkie-talkie button - Keep this button depressed to speak to baby
8 Socket
9 Battery compartment
3- Switching on
Step 1: connecting the units and charging the battery
Connect the Baby unit to the wall socket using the adapter supplied.
Insert the battery supplied into the Parent unit, then plug the Parent unit into the wall socket and leave
the battery to charge for 12 hours
Step 2: switching the units on
Press the ON/OFF button on each unit for five seconds.
The operating indicators will flash on each unit to indicate they are seeking to establish a connection. The
indicator stops flashing once a connection between the two units has been established.
Step 3: displaying information on the screen
Once both units are switched on, various items of information appear on the screen, in the top right-hand
part.
The temperature of baby's bedroom
The battery's state of charge
The connection status between the two units
4- Functions
The Parent unit has various functions you can use to keep an eye on your baby and comfort him/her
remotely.
Press the ON/OFF button (1) once to access the Menu. It appears in the left-hand part of the screen.
To browse the menu, use the Up/Down arrows.
To configure each function, use the Left/Right arrows.
Adjusting the sound volume (6 levels)
Press the left arrow to reduce the volume or the right arrow to increase it.
ECO mode
Press the Left or Right arrows to enable or disable this mode.
This mode permits monitoring when the child is asleep and making no sound, thus
saving energy.
Mode enabled (pictogram with a green/red face): the screen only switches itself on
when the Baby unit detects a sound.
Mode disabled (pictogram with a green face): the screen remains on permanently.
Adjusting the brightness (6 levels)
Press the left arrow to reduce the brightness of the screen or the right arrow to
increase it.
7