Zoom (2 levels)
Press the Left or Right arrows to zoom in or out.
Lullabies (12 tunes)
Press the Left arrow to enable lullabies and to move to the next.
Press the Right arrow to disable lullabies.
5- Warnings
Low battery warning
The Parent unit operates on a rechargeable battery. An indicator light (4) warns you in the event of a low
battery:
- A flashing LED if the battery level is lower than 2.35V.
- The unit switches off automatically if the battery level is lower than 2.2V.
Out of range warning
In the event of the connection between the two units being lost for six seconds or more, the Parent unit
warns you by beeping.
6- Troubleshooting
Problem
Operating indicator light goes out
Operating indicator light flashing
Piercing sound
No sound on the Parent unit
No connection between the
two units
7- Caution
UNDER NO CIRCUMSTANCES CAN THIS BABY ALARM REPLACE surveillance by an adult.
- The transmitter has been designed to detect sounds, the volume of which is deemed to be normal within
an approximate radius of 1 to 1.5 metres. It cannot detect silent activities such as baby's movements.
- This system must not be used as a spy system. This type of use is strictly illegal.
- Before using the device, please check that neither the product nor any of its components are worn or
damaged. If in doubt, do not use the device and contact your local supplier or a qualified expert.
- Only use this product with the electrical connections included or supplied as accessories.
- Please ensure that electrical devices and their wiring is out of the reach of children.
- The maximum range is approximately 300 meters in a clear field without obstacles. The device's range
varies according to the obstacles encountered (the terrain, the number of partitions between the trans-
mitter and receiver, the presence of metal structures, the battery level, etc).
- In order to maximise the range, we recommend plugging the transmitter into the mains power supply.
The transmitter's range is less (less than 300 meters if there are no obstacles) when it is operating on
Possible cause
• Unit switched off
• Adapter not plugged in
• Low battery
• Units not connected to each other
• Low battery
• Units too close to each other
• Volume too high
• Volume muted or too low
• Units out of range
8
Solution
• Press the ON/OFF button
• Plug in the adapter
• Charge the battery
• Make sure a connection is
established
• Charge the battery
• Move the units away from each
other (at least 1 m)
• Reduce the volume
• Increase the volume
• Move the units closer to each
other