Tabla de contenido
Publicidad
Pressure Washers
Troubleshooting Chart
Symptom
No detergent
suction – units
with tanks
No detergent
suction – units
with attachable
applicators
Unit begins to
smoke
Possible Cause(s)
1. Lance nozzle not in low pres-
sure position
2. Using high pressure exten-
sion hose or high pressure
hose is too long
3. Injector clogged on pump
Detergent applicator clogged
Overheated, overloaded or
damaged motor
Corrective Action(s)
1. Slide lance nozzle into low
pressure position (see page 8)
2. Remove high pressure exten-
sion hose or use high pressure
hose shorter than 25 feet
3. Call 1-800-330-0712
1. Clean applicator with warm
water
2. Replace applicator
Turn off unit and call
1-800-330-0712
11
www.chpower.com
Publicidad
Tabla de contenido
