Electrical Connections - Hinkley 60" GLADIATOR ILLUMINATED Manual De Instrucciones

ELECTRICAL CONNECTIONS

NOTE:
One fan per power circuit.
To avoid possible electrical shock, be sure electricity is turned off
at the main fuse or breaker box before wiring.
Connect the fan supply (black) and light (blue) wires to the black
1
household supply wire as shown in Figure 1
Connect the neutral fan (white) wire to the white neutral household
2
wire (Figure 1).
After all splices are made, check to make sure there are no loose
3
strands. As an additional precaution we suggest to secure the plastic
wire connectors to the wires with electrical tape.
08 | hinkley.com
WARNING:
Outlet Box
Black ("AC IN L")
Blue (Light)
Black (Motor)
Fig. 1
White ("AC IN N")
Green or bare
copper (ground)
Ground (green)
White (Neutral)
(Connect to ground wire
on hanger bracket if no
house ground wire exists.)