Installing The Glass Shade - Hinkley 60" GLADIATOR ILLUMINATED Manual De Instrucciones

INSTALLING THE GLASS SHADE

Fig. 1
12 | hinkley.com
Pull chain
Glass shade
Glass cap
Decorative nut
While holding the glass shade , slip the pull chain
1
from the light kit into the outside hole in the glass
shade .
2
Feed the pull chain from the light kit stem through
the eyelet in the glass shade .
3
Fit the glass cap onto the light kit stem, and then slip
the pull chain from the side hole in the glass shade
through the hole on the side of the glass cap .
4
Feed the pull chain from the light kit stem through
the decorative nut , and then thread the decorative
nut on securely. Do not overtighten.