Introduction - Fermax ADS Manual De Introducción

INTRODUCTION

Depending on the configuration and type of installation, the ADS Guard Unit
operations are as follows:
Operation as Guard Unit in buildings
The function is to answer calls to and from homes and operate as a 'filter' between
the calls made from the outdoor panels to the homes.
In this type of configuration, all the functions available in the equipment are operative,
and their handling is explained on pages 11 to 19.
The Guard Unit only works with ADS telephones and/or monitors.
Assembly of the Guard Unit requires a Connections Module Ref. 2492. (Connection
diagram on page 26).
Operation as Intrercommunication Centre
One special application of this equipment is as an Alarms Reception Centre in
the designated ADS Radial Intercommunication System.
In this type of configuration only the telephone communication functions are
operative, so the handling is explained on page 20.
The Intercomunication Centre only works with ADS telephones and/or monitors.
Connection diagram on 27.
NOTE:
To prevent theft or undesirable manipulations, the ADS Guard Unit incorporates a plug-
in connector, which can be removed when it is not going to be in use for some time (for
example during the night).
Simply plug it in again and it is operative once more.
Pag 4