Programmed Maintenance; Recommended Brushes - ADIATEK 11 2011 Manual De Uso Y Mantenimiento

GB

PROGRAMMED MAINTENANCE

INTERVENTION
RECOVERY TANK CLEANING
SUCTION FILTER CLEANING
BRUSH CLEANING
BRUSH REMOVAL
SQUEEGEE ASSEMBLY CLEANING
FRONT SQUEEGEE RUBBER REPLACEMENT
REAR SQUEEGEE RUBBER REPLACEMENT
SQUEEGEE HOSE CLEANING
SOLUTION TANK CLEANING

RECOMMENDED BRUSHES

Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristle diameter are the elements that distinguish different types of brushes.
MATERIAL
PPL (Polypropylene)
BRISTLES THICKNESS
PAD HOLDER
CODE QUANTITY
48903020 1
48903030 1
48903050 1
48803010 1
48803030 1
48803040 1
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
On irregular floors with deep joints or relieves, softer bristles penetrate more easily and deeper. Please be aware that when brush
bristles are worn out they become rigid and unable to penetrate and clean deeper. This may also cause brush vibration with thicker
bristles.
Pads are recommended to clean smooth surfaces. The pad holder has anchor points to retain the pad. It is important that the
height of the pad holder with its pad is the same as the one of the brush.
DESCRIPTION
Brush PPL 0,6 Ø 345
Brush PPL 0,9 Ø 345
Brush 5-mix Ø 345
Pad holder Ø 330
Pad holder Ø 330 + center lock green
Pad holder Ø 330 + center lock black
DAILY ORDINARY/MONTHLY
•
•
•
•
•
• as required
• as required
USE
Normal floors.
Smooth floors with small joints and persistent dirt.
For all types of floors.
For pads of 14", for smooth surfaces cleaning.
For pads of 14", for smooth surfaces cleaning.
For pads of 14", for smooth surfaces cleaning.
21
•
•
GB