Make sure your local voltage matches the technical data of the appliance. Otherwise the appliance
may overheat and get damaged.
1. Place your fan on an even, dry and stable surface and connect it to a properly installed wall socket.
2. Press the ON/OFF button, the POWER indicator ligh lights up, the appliance is now ready for operation.
3. choose your desired settings by pressing the respective buttons on the control panel or remote control.
Make sure that the water tank is filled with water if using the MIST function
4. After use, switch off the the appliance and unplug it.
Never leave the appliance unattended during use.
Always remove the battery from the remote control if it will not be used for a longer period
of time.
ADJUST TILT ANGLE
Caution: The fan should always be switched OFF when making this adjustment!
To adjust the desired fan angle, tilt the motor unit up or down until it clicks into place.
Do not tilt the fan head further than it is intended to go!
Inserting / Replacing the battery of the remote control
1. To open the battery compartment, press slightly onto the battery cover and push it downward.
2. Insert 2 x 1.5V AAA batteries according to their polarity (+/-).
3. Re-attach the battery cover to the remote control. Make sure that the battery compartment is properly
closed.
CLEANING AND CARE
Before cleaning, always switch off the appliance and disconnect it from the mains.
Never immerse the appliance in water. Danger! Electric Shock!
-
clean the appliance using a a soft damp cloth.
-
Never spray the appliance with liquids or submerge it in water or other liquid.
-
For cleaning purpose, front and back grill as well as the fan blade can be removed.
After the cleaning process is finished make sure that all parts are dry and that the front/back grill incl.
fan blade are properly reassembled.
Never use alcohol, gasoline, and/or any other aggressive cleaning agents/hard objects.
CAUTION: The Fan Blade may have sharp edges. Handle with extreme care.
Instruction Manual
ENGLISH
27