ISEO Zero1 THESIS 2.0 Manual Del Usuario página 24

WARNINGS
• Failure to comply with the instructions laid out in this
manual will affect the proper functioning of the lock, with
consequent loss of warranty.
• This product can only be used for what it was specifically
designed to do. Any other use is considered irregular and
dangerous.
• Provisions should be made to ensure that a suitable
isolation and protection switch be placed upstream of the
power supply.
• Do not use the lock as a drilling template.
• Do not paint or lubricate the lock.
• Always ensure the bolt is clean and free of friction. In case
the valve needs to be cleaned, do not use products that
can leak into the lock.
• We recommend you equip the door with a door closer to
prevent rebound when closing the door.
1-4
• If there is no power supply, the NC version of the solenoid
lock can only be opened mechanically through the cylinder
or the handle (where applicable). On the other hand, the
NA version of the solenoid lock cannot be mechanically
closed if there is no power supply.
• FIAM srl. is not required to comply with warranty conditions
if the product has been subjected to changes, repairs or
alterations by unauthorized personnel.
• For manufacturing and commercial reasons, or to improve
the quality of its product, FIAM srl reserves the right to
make any changes it deems appropriate to the product and
its instruction manual without prior notice.