Lock And Cylinder Installation - ISEO Zero1 THESIS 2.0 Manual Del Usuario

1.2 LOCK AND CYLINDER INSTALLATION

After positioning the
cylinder in its place,
secure with the screw
provided.
CAUTION
Use only European profile
cylinders, cam DIN. If you
use cylinders provided with
positive fit cam positioned
at 30° or 45°, then the
cam should be oriented as
illustrated.
ø
18
11
The position shown should
be achieved with the
key d sconnected. Non-
compliance with what
is indicated above will
compromise the correct
functioning of the lock.
GB
1-7