Electrical Connections - ISEO Zero1 THESIS 2.0 Manual Del Usuario

2. ELECTRICAL CONNECTIONS

1-12
"LOCKBUS" Communication Channel
Positive - power supply 8÷30 VDC 1A (+)
Negativ - power supply GND (-)
Realy Common contact signal (COM)
Normally closed relay contact signal (NC)
Normally open realy contact signal (NO)
8÷24 VDC/12 VAC
T1 Opening push button (not included)
POWER SUPPLY
OPENING command
Optically isolated entry
CAUTION
Minumum cross-section of the power lines in
relation to the installation length:
up to 10 m section. 0.5 mm
10÷40 m section. 0.75 mm
40÷50 m section. 1 mm
50÷75 m section. 1.5 mm
75÷100 m section. 2.5 mm
Take care not to damage the cables while faste-
ning the lock to the frame.