ISOtunes Noise-Isolating Manual De Usuario página 4

Included with your ISOtunes are a pair of SecureFit tips (pictured
™
below) that can be used to stabilize the headphones during sports
activities. To put each fit tip on, simply remove the earbud and place
the ring over the earphone. Then, after replacing the earbud, fit the
earphone with the fit tip resting snugly against your inner ear.
Additionally, two mini
cable clips have been
included to tie back and
secure excess wire.
These will allow you to
wear your ISOtunes
™
comfortably while
participating in
mobile activities,
such as running.
Operating Your ISOtunes
On/Off
To turn on your ISOtunes , press and hold the Multifunction Button (MFB)
™
for 2 seconds, or until you hear "Power On" through the speakers. The
indicator light will turn blue for 1 second to confirm the power is on.
To turn off your ISOtunes ™ , press and hold the MFB for 3 seconds, or until
you hear "Power off" through the speakers. The indicator light will turn red
for 1 second to confirm the power is off.
Headphones
™