Environmental Protection - Ryobi ERH-650V Manual De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
GB
FR
DE
ES
IT
REVERSING THE DIRECTION OF ROTATION
The direction of rotation of the drill may be changed by
the use of the reverse lever on the switch, situated above
the trigger. The position of this should only be changed
when the drill is at a standstill.
The reverse lever has two positions:
Clockwise rotation: Set the reverse lever to the right
position.
Anti-clockwise rotation: Set the reverse lever to the
left position.
Important
When hammer drilling, you do not need to force
the drill. Too much pressure will place unnecessary
load on the motor. Check the drill bits regularly.
Re-sharpen or replace blunt drill bits.
LIVE TOOL INDICATOR
This tool features a live tool indicator (7) which illuminates
as soon as the tool is connected to the supply. This warns
the user that the tool is connected and will operate when
the switch is pressed.
MAINTENANCE
Unplug the hammer drill before making any adjustment,
servicing or cleaning the tool.
Keep your machine clean at all times.
Never use caustic agents to clean the plastic parts.
At the end of your work, to prevent dust deposits you
should use compressed air (max. 3 bar) to clean out
the ventilation slots.
Check the carbon brushes regularly (dirty or worn
carbon brushes result in excessive sparking and
speed faults).

ENVIRONMENTAL PROTECTION

Recycle raw materials instead of disposing
as waste.
The machine, accessories and packaging
should be sorted for environmental-friendly
recycling.
ERH-650V&ERH-750V 24lag-ok.indd Sec1:3
ERH-650V&ERH-750V 24lag-ok.indd Sec1:3
NL
PT
DK
SE
FI
NO
English
RU
PL
CZ
HU
RO
LV
SYMBOL
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
V.................................................................................Volts
Hz..............................................................................Hertz
.........................................................Alternating Current
W...............................................................................Watts
n
................................................................No load Speed
o
min
.....................Revolutions or reciprocation per minute
-1
.....................................................Double Insulation
..........................................Read instruction manual
.......................Wear Personal protective equipment
.................................Recycle raw materials
instead of disposing as waste. The machine,
accessories and packaging should be sorted for
environmental-friendly recycling.
3
LT
EE
HR
SI
SK
GR
6/24/09 6:01:32 PM
6/24/09 6:01:32 PM
TR

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Erh-750v

Tabla de contenido