Electrical Wiring Diagram - LUCCI Air AIRFUSION BANKSIA DC Manual De Instrucciones De Instalación

Banksia Fan Installation Instructions
WARNING: For youre safety all electrical connection must be undertaken by a licensed electrician.
NOTE: An additional all pole disconnection switch must be included in the fixed wiring. Please make sure the
main switch has been turned off before connecting.
NOTE: If there are two or more DC ceiling fans installed in the one location, an isolation switch is required for
each ceiling fan. This is required when programming the remote and receiver to pair together.
NOTE: Wiring diagram includes the light kit wiring. The light wiring diagram is omitted when no light kit is
used with the ceiling fan.
Wiring requirement: (Fig.6)

Connect the power supply Live wire to the "L" terminal; connect the power supply Neutral wire to "N"
terminal; connect ground wire to "

Insert the DC motor receiver into the mounting bracket.

Insert the 3-ports fixed wire quick connector (1) to the DC motor receiver power input socket (2).

Insert the DC motor receiver output wire connector (3) to the DC motor receiver power output socket (4).

Connect the DC motor receiver output wire and the motor power input wires via the 4-ports quick
connectors (5).

Insert the LED driver power input wire connector (6) to the DC motor receiver light output socket (7). For
fan model without light, ignore this LED driver power input wire (9) connection.

Connect the earthing conectors together via the 1-port quick connectors (8).
7 | P a g e

ELECTRICAL WIRING DIAGRAM

Fig. 6
" terminal.