Finishing The Installation - LUCCI Air AIRFUSION BANKSIA DC Manual De Instrucciones De Instalación

Banksia Fan Installation Instructions

Loosen the 2 screws from the bottom of the mounting bracket.

Slide the canopy up to the mounting bracket and place the key hole on the canopy over the screw on the
mounting bracket, turn the canopy until it locks in place at the narrow section of the key holes and secure
it by tightening the two set screws. Avoid damaging the electrical wiring prepared previously.
How to replace the LED driver (For models with light kit)
NOTE: Always turn Off the power at the mains switch before attempting to replace the LED driver.
Loosen the screw (A) to lift the top housing (B). Replace the LED driver by unplugging the connectors (C, D).
Reposition the top housing and secure it on the down rod by screw.
8 | P a g e

FINISHING THE INSTALLATION

Fig. 7
Fig. 8