Zyxel PLA-450 Guia De Inicio Rapido página 13

• Select Get from DHCP Server to get an IP address
from a DHCP server on your network. If you have a
router, it likely includes a DHCP server function.
• To use a specific (fixed) IP address, select User
Defined LAN IP address and enter it. You only need
to change the subnet mask or default gateway if you
have specific ones for the PLA-450 to use.
2 Click Apply. The PLA-450 now uses the new IP settings;
you can no longer connect to the PLA-450 using the
default IP address.
If you change the PLA-450's IP address, use the
new IP address to access the web configurator.
If the PLA-450 gets the IP address from a DHCP
server, check the DHCP server to find the IP
address it assigns to the PLA-450. Refer to your
DHCP server's documentation for more
information.
3 If you changed your computer's IP address in section 2.1,
return it to its previous setting.
4 Change the wireless settings in the wireless stations to
match those of the PLA-450. Refer to your wireless
adapter's documentation.
The PLA-450 is now ready to connect to your switch or router.
ENGLISH
13