Wireless Network Setup - Zyxel PLA-450 Guia De Inicio Rapido

• Name: Enter a descriptive name (up to 32 printable
English keyboard characters) for your wireless net-
work.
• Security Mode: Select WPA-PSK.
• Pre-Shared Key: Type a pre-shared key. Use 8 to 63
English keyboard characters (including spaces and sym-
bols). It is case-sensitive. Write it down to use in your
wireless clients so they can connect to the PLA-450.
Write down the name and pre-shared key to use
in the wireless clients later.
3 Click Apply.
You have configured your PLA-450's wireless settings. Use
the following section to configure your wireless devices to
connect to the PLA-450.

4 Wireless Network Setup

Do the following to set up a wireless network with computers
with wireless network cards or adapters. You need the
network name and pre-shared key you configured in section
3.
1 Open your wireless adapter's utility (yours may be
different from the one shown here).
ENGLISH
8