Component List; Technical Data; Assembly And Operation - Worx WX508L Manual De Instrucciones

Incorrect
Correct
TPI
Teeth per inch
POSITEC Inc. has established a partnership with
the RBRC Corporation to recycle any Positec
batteries with the RBRC-call2recycle seal. For
environmental protection, please do not discard
batteries in the trash. After the batteries' life cycle
is ended, please call 1-800-822-8837 for a free
service that will properly dispose of the battery.

COMPONENT LIST

1. BLADE*
2. LED LIGHT
3. HAND GRIP AREAS
4. LOCK-OFF BUTTON
5. BATTERY PACK RELEASE BUTTON*
6. BATTERY PACK*
7. ON/OFF TRIGGER SWITCH
8. PENDULUM ACTION CONTROL
9. BLADE CLAMP RELEASE LEVER
10. ADJUSTABLE PIVOT FOOT PLATE
* Not all the accessories illustrated or
described are included in standard delivery.
Cordless Reciprocating Saw

TECHNICAL DATA

Type WX508L WX508L.9(500- 519-designation
of machinery, representative of Reciprocating
Saw)
Voltage
No-load speed
Stock length
Wood
Cutting
Steel
capacity
PVC pipe
Pendulum position
Machine Weight
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
ACCESSORIES
Blade for wood
Blade for steel
Battery pack
Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
Only use the appropriate accessories intended for
this tool. Accessory information can be found on
the product packaging, at a WORX dealer or on our
website at www.worx.com.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.

ASSEMBLY AND OPERATION

ACTION
Removing The Battery Pack
Charging The Battery Pack
WX508L WX508L.9
20V Max**
0-3000/min
7/8 inch
7 inch
15/32 inch
3 inch
4
5.7lbs 4.9lbs
WX508L WX508L.9
1 1
1 1
1 /
1 /
FIGURE
See Fig. A1
See Fig.A2
EN
9