Aerial connection
Mains connection
Other optional connections
18
The antenna socket input is on the left of the main
FM ANT
device (
). Wire aerial is included. Adjust the wire
aerial for optimum reception.
Alternatively, for VHF reception you can connect a 75
ohm antenna cable (not included) to the antenna
socket. To do so, disconnect the wire aerial.
Once you have made all the connections, connect
the plug to an easily accessible mains socket (230V ~
50Hz).
AUX IN connection
You can use the connection
main device for connecting an external audio signal
(e. g. from a tape recorder).
Switch the device to standby mode.
Switch off your external device.
Plug in the red and white plugs of the cinch cable
(not included) into the appropriate colour coded
AUX input sockets.
Plug the other end of the cinch cable into your
external unit.
Switch your external unit on.
Switch your device on using the
FUNCTION
Press
shown on the display. The audio signal from your
external device will now be played back.
AUX
on the left side of the
STANDBY
and the function "
button.
AUX
" will be