Use And Operation - auna DABStep Manual Del Usuario

USE AND OPERATION

Initial Use
• Connect the device to any household mains outlet using the supplied
AC/DC adapter.
• On first startup, the device will switch to DAB mode and automatically
scans the band for available DAB/DAB+ stations to tune in. This can
take a few minutes.
• Press STANDBY/MODE on the device, or
device on (hold for standby mode). The time, date and any activated
alarm will be displayed.
• If time and date have not been set yet, the display shows „00:00 00-00-
00".
Basic / Global Functions
• Press STANDBY/MODE on the device, or MODE on the RC repeatedly,
to select the desired mode: DAB -> FM -> BT -> AUX
• Turn the VOL knob or us
level. Press to toggle mute on/off.
Main menu and settings
• Press and hold MENU/INFO on the device, or MENU on the RC, to open
the settings menu from any mode.
• Press < / >, to scroll through and press OK / SELECT to enter, or
respectively to confirm the setting made.
on the RC, to switch the
/ on the RC, to adjust the volume
EN
19