Metra 99-7510 Instrucciones De Uso E Instalación página 8

Installation instructions for part 99-7510
Display Customization (Cont)
5. To change the Hour press the rear defrost button to the right of the A/C Mode button.
6. To change the minute press the A/C button at the top of the A/C Mode button.
7. At any time if you do not press any buttons for 5-seconds the display will save and return to the
default screen and the climate control buttons will return to their normal configuration.
8. If you hold the A/C Mode button down long enough the display will say "SET TEXT". This will allow
you customize the default text on the display.
9. Once the display says "SET TEXT" let go and the first letter of the display will begin blinking.
10. Press the front defrost button to move the cursor left and the rear defrost button to move the
cursor to the right.
11. You can scroll up with the A/C button and down with the Recirc/Fresh button through the various
alpha, numeric, and symbol characters.
12. When you are finished entering your text if you do not press any buttons for 5-seconds the display
will save and return to the default screen and the climate control buttons will return to their normal
configuration.
METRA - The World's best kits
®
® metraonline.com
IMPORTANT
If you are having difficulties with the
installation of this product, please call our
Tech Support line at 1-800-253-TECH.
Before doing so, look over the instructions a
second time, and make sure the installation
was performed exactly as the instructions
are stated. Please have the vehicle apart
and ready to perform troubleshooting steps
before calling.
K
NOWLEDGE IS
Enhance your installation and fabrication skills by
enrolling in the most recognized and respected
mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps
toward a better tomorrow.
Metra recommends MECP
certified technicians
© COPYRIGHT 2016 METRA ELECTRONICS CORPORATION
P
OWER