Tools Required - Metra 99-7510 Instrucciones De Uso E Instalación

Kit Assembly
ISO DIN radio provision with pocket
1. Remove the metal DIN sleeve and
trim ring from the aftermarket
radio.
2. Secure the ISO DIN brackets to the
radio using the screws supplied
with the radio. (Figure A)
3. Slide the radio into the radio/
climate control housing until it
snaps into place. (Figure B)
4. Snap the ISO DIN trim plate into
the radio/climate control housing.
(Figure B)
Continue to Axxess
Interface Installation
(Figure A)
(Figure B)
®
99-7510
Axxess Interface Installation
TABLE OF CONTENTS
Connections to be made ...................................................6
Installing the interface .....................................................7
Display Customization .................................................. 7-8
INTERFACE FEATURES
• Provides NAV outputs (parking brake, reverse, speed sense)
• Can be used in both amplified and non-amplified models
• Retains balance and fade
• USB-CAB updatable (sold separately)
INTERFACE COMPONENTS
• 7510 harness • OBDII harness with stripped leads
• Hazard switch extension cable • Climate control extension harnesses (2)

TOOLS REQUIRED

• Wire Cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
5