Kit Assembly - Metra 99-7510 Instrucciones De Uso E Instalación

Kit Preparation
To the 99-7510 radio/climate
control housing:
1. Cut the top (2) mounting locations
off of the climate controls
to provide clearance for the
aftermarket radio. (Figure A)
2. Secure the climate controls using
the factory hardware. (Figure B)
3. Secure the hazard switch
assembly using the factory
hardware. Push the hazard switch
button back into the assembly.
(Figure B)
4. Attach the (4) plastic panel clips
provided.
Continue to Kit Assembly
(Figure A)
0 1
2
3
4
(Figure B)
®
99-7510
DIN radio provision with pocket
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the radio/
climate control housing and secure
by bending the metal locking tabs
outward. (Figure A)
3. Slide the radio into the sleeve until
it clicks in. (Figure B)
Continue to Axxess
Interface Installation
4

Kit Assembly

(Figure A)
(Figure B)