How To Use - Black and Decker Spacemaker CG700 Instructivo Antes De Usar El Producto

14. Place the appropriate number of spacers determined in step 12 on both of the
rear screws to ensure the appliance will be even (L).
L
Note: If the height of your overhang molding is too tall to be accommodated by
the number of spacers provided, you may call, toll-free, at 1-800-231-9786 to
order additional spacers at no charge.
Note: For spacer installation, you may require assistance in mounting in order to
hold spacers in place while securing the appliance at the same time. If assistance
is not available, use a small clamp to hold the spacers in place while you position
the appliance.
15. Once spacers are set, hold appliance up and tighten screws to secure. Screw
from inside the cabinet down.
Note: lways tighten screws to ensure the appliance does not move or shake
during operation.
16. Pull out cord from cord storage behind appliance and plug into standard
electrical outlet. Extra cord can be fed back into storage or hung over cord
management hook behind unit (see illustration F).
Note: If you are connecting this appliance to the receptacle of another
†SpaceMaker™ appliance such as the toaster oven or coffeemaker, make sure you
can easily unplug the appliance following use.
17. Your †SpaceMaker™ appliance is now ready for use!

How to Use
This appliance is for household use only.
GETTING ST RTED
1. For warranty verification, do not remove line cord tag.
2. Please go to www.prodprotect.com/applica to register your warranty.
3. Wash the coffee grinding bowl, mini food processor workbowl and both blades
in hot soapy water; rinse and dry thoroughly as directed in the C RE ND
CLE NING section of this Use & Care manual.
Important: lthough these parts can be washed in the dishwasher, we
recommend they be washed by hand to preserve the sharpness of the blades and
the appearance of the workbowl. Do not immerse the appliance in water.
4. Wipe outside of appliance with a damp cloth; dry thoroughly.
Note: For your protection this appliance has a dual safety mechanism. Do not
attempt to use this appliance unless either container with the appropriate blade
is in place.
GRINDING COFFEE BE NS
1. Place the grinding blade on the spindle in the center of the grinding bowl, making
sure the blade rests at the bottom of the stem. With your fingers on the top of the
stem of the grinding blade, give it a twisting motion to make sure it is securely
seated on the spindle (M).
M
Important: Handle grinding blade carefully. It is very sharp.
2. Place desired amount, up to ¾ cup (70 g), of coffee beans into the grinding bowl.
3. With your fingers on the top of the stem of the grinding blade, use a twisting
motion to make sure the coffee beans are evenly distributed in the grinding bowl.