Metronic Zapbox twin 5 Manual Del Usuario página 58

First Time Installation
Lock a TV or Radio channel :
1.Select the preferred channel then press the YELLOW button. A lock-shaped symbol is displayed.
The channel is now marked as locked.
2. Repeat the previous step to select more channels.
3. To confirm your settings and exit the menu, press the EXIT button.
4. Press the YELLOW button to disable the locked channels function.
EN
5. To view the locked channels , you will be required to enter either the default password '004000'
or your last set password. The master unlock password is '004000'.
b) EPG (Electronic Programming Guide)
This feature shows the TV program listings for each channel for the following 7 days. By default,
when the EPG is opened, the current channel's listings are shown. To view listings for other
channels, press the LEFT and RIGHT arrow keys. The display shows the buttons to press to go
forward or backward in the programs listing.
Note: Please see section (d) "Scheduling" to learn how to schedule program recordings and
channel preview.
Preview Channel:
To set the receiver to change to a channel at a specific time (e.g. at the start of your favourite
program) while you are watching another channel, please follow these steps:
•Press EPG to open the full listings.
•Select the TV channel using the LEFT / RIGHT arrow keys.
•Select the TV program you want to watch later.
•Press OK. On the window that pops up, you are able to modify the channel, date and time, as
well as optionally selecting to repeat this action on a regular basis.
•Select "View" in the "Mode" option.
•Press EXIT
A few seconds before changing channels, a warning message with a count-down is displayed on
screen, which will change to the programmed channel when the count-down ends.
(c) Sort
Sort your channels from the following options:
[By LCN] - Sort the channels in ascending order.
[By Encrypt] Sort the channels in encrype order.
13
7
Technical service: soporte@metronic.com