Metronic Zapbox twin 5 Manual Del Usuario página 66

First Time Installation
•Select "OTHER RECORDING" in the "Mode" option.
•Press EXIT.
A few seconds before starting to record, a warning message with a count-down is displayed on
screen, which will change to the programmed channel when the count-down ends. Once the
recording has finished, a confirmation message appears on screen.
To view the scheduled events, press the blue button.
To delete a scheduled event, select the event and press the blue button.
The recording files can be deleted on this unit, you can go to the PVR,and press yellow botton to
delete it. the TV program is recorded to file at PVR format, which can be playde back on this unit
and PC using a suitable player ,but can not be played back on DVD or PDVD.
For recording the high definition TV programs,the version of usb device should be 2.0 or above,
otherwise the unit may can not record the hd programs correctly.
When recording to usb stick or external hard disc on this model, you have to wait a few seconds
before pushing rec. after inserting the media. Otherwise the unit can freeze in the signal.If that
happens, then please take off power and connect again to fix this.
Note:
Scheduled recording only works when the unit power is on,it can not work when the unit is standby.
Note:
- We cannot guarantee compatibility (operation and/or bus power) with all USB mass storage
devices and assume no responsibility for any loss of data that may occur when connected to this
unit.
- With large amounts of data, it may take longer for the system to read the contents of a USB
device.
- Some USB devices may not be properly recognised.
- Even when they are in a supported format, some files may not play or display depending on the
content.
(e) Timeshift
14
Technical service: soporte@metronic.com
EN
21