Metronic Zapbox twin 5 Manual Del Usuario página 61

First Time Installation
(b) Manual Search
This option allows you to scan for new channels without deleting previously saved channels and
settings.
1. Select [Manual Search] then press OK or RIGHT. The channel search screen will appear.
EN
2. Press the RIGHT/LEFT key to select the channel frequency.
3. Press OK to start searching channels.
If a channel is found, it is saved and added to the channels list. If channels can not be found
during searching, the unit will exit automatically.
(c) Satellite Channel Search
1. Press UP/DOWN to select the sateaite which will be search. Then press right to set LNB type.
LNB power.
2. Press Blue key to display channel search page.
3. Press RIGHT/LEFT to set scan mode, like default, blind scan, network. Then press OK to search.
4. Press goto to show transponder list, press green to edit a transponder, press red to add a
transponder. press yellow to delete a transponder.
(d) Country
Select your country of residence.
(e) Antenna Power
Enable Antenna Power if an external active antenna is connected.
16
10
Technical service: soporte@metronic.com