When Connecting To Separately Sold Power Amp - Pioneer AVH-P4200DVD Manual De Instalación

Connecting the units

When connecting to separately sold power amp

Rear output
Front output
Subwoofer output
This product
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (5*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 5*
and 6* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 5* and 6*.
(AVH-P4200DVD only)
•When you connect the separately sold
multi-channel processor (DEQ-P6600) to this
unit, do not connect anything to the speaker
leads and system remote control (blue/white).
•When you connect the multi-channel
processor to this unit, refer to multi-channel
processor's installation manual for the
connection method.
Perform these connections when
using the optional amplifier.
6
(AVH-P4200DVD/AVH-3200BT only)
(AVH-P4200DVD only)
To rear output
To front output
(AVH-
P4200DVD
To subwoofer
only)
output
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Connect with RCA cables
(sold separately)
System remote control
Left

Subwoofer


Front speaker


Rear speaker

Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Right

Subwoofer


Front speaker


Rear speaker
