KTM Power Parts 75005007200 Manual Del Usuario página 10

The Akrapovic exhaust system must only be used with serial mapping if catalysts are fitted. For optimal performance, e.g. racing,
the catalysts can be removed. For this purpose, an extra mapping, available for downloading from KTM Dealer.net, must be
installed by an authorized KTM workshop. The secondary air system nust remain active. This mapping must under no
circumstances be used with the standard exhaust system or the Akrapovic exhaust system if catalysts are fitted! This is a fire
hazard!
Scope of delivery:
Titan factory manifold
1x manifold connection part
1x manifold center part
1x manifold end part
1x carbon heat protector
6x exhaust springs
Main silencer set
1x main silencer, left
1x main silencer, right
Solo fitting set
1x carbon exhaust bracket
1x number plate bracket, upper part
2x carbon clamps with mounting material
1x flasher bracket plate
optional if EC report necessary (75005099500)
Kat Set
10 2x catalysts
Check the schematic layout of the exhaust system before fitting!
If any parts of the Akrapovic exhaust system are missing, contact your dealer. Keep the schematic layout for future reference!
Read these installation instructions carefully to ensure correct installation and operation of the exhaust system.
The exhaust system can get extremely hot! Let the engine cool down before starting installation!
We recommend that you leave installation to a qualified service technician. Incorrect installation can lead to a reduced working life
of the exhaust system or damage to the motorcycle.
75005007200
75005099400
75005088044
75005099050