KTM Power Parts 75005007200 Manual Del Usuario página 16

Final assembly
Align the exhaust system. Make sure that the silencers do not touch any other parts of the motorcycle. Tighten all screws and nuts:
- Tighten the manifold nuts evenly on the cylinder head to 25 Nm.
- Manifold clamp under the engine to 25 Nm.
- Carbon clamp on the subframe.
Remove all grease remains with a soft cloth sprayed with multi-purpose solution (Motorex Joker 440).
Cleaning prevents stains on the surface. Do not use any aggressive chemical cleaners that could damage the sticker.
It is normal for white smoke to emerge from the silencer when the exhaust system is first used! Finally, check for leaks in the whole
exhaust system.
Do not stand behind the exhaust system when first operated!
Maintaining the Akrapovic exhaust system
Clean with a multi-purpose lubricant spray (Motorex Joker 440).
A change of color of the exhaust system is normal due to high temperatures.
Wear and tear to the sound insulation material of the silencer depends on the type of engine and your driving style. Contact your dealer
if there are visible changes to the exterior of the silencer or the noise level is raised. Check regularly that all screws are tight and the
springs are correctly seated.
16
Spare parts:
[1] Silencer insert
[2] Carbon clamp
[3] Exhaust spring, short, with rubber
[4] Repair kit for main silencer (shell, sound insulation kit, 2x tapes, rivets, stickers
[5] Sound insulation kit for main silencer with 2x tapes, rivets and stickers
[6] Akrapovic sticker
[7] Blind rivet 4,8x8,0 NIRO
[8] Silencer cap, carbon, with tape and rivets
[9] Licence place holder, upper part
[10] Exhaust bracket
[11] Flasher bracket with cover sticker
[12] Carbon heat protector
9
1
11
10
7
8
4
5
6
2
12
75005099002
61005099102
57305016100
75005099206
75005099210
SXS07540509
0011480800
62505099104
75008015010
7500508800049
75005099208
75005099207
3