Connecting The Unit - Triax TMB 200 Manual Del Usuario

Programmable Multiband Amplifier
TMB 200 & TMB 200S
We recommend you install the unit in a sufficiently ventilated place.
Natural ventilation must be able to occur through the ventilation grids;
leave a minimum space of 15 cm around the unit to ensure maximum
ventilation. When installing or cabling the unit, we recommend you
disconnect the mains power cable.

Connecting the unit

Note: UHF inputs are remotely supplied and protected against short circuits. The power available is 12 or
24V, 80mA max.
awi -july 14
Inputs BI-FM BIII
Earthing
connector
Output
UHF USB Interface
3
TMB 200-V1