Dyna-Glo DGG424CNP Manual Del Usario página 10

ASSEMBLY INSTRUCTIONS
7. Attach the left door assembly (T) and the right
door assembly (V) to the cart left side panel
assembly (M) and the cart right side panel
assembly (N) with eight M4x12 bolts (BB).
Hardware Used
BB M4x12 Bolt
8. Pre-assemble two M4x12 bolts (BB) onto the
left side shelf front assembly (J) and do not
tighten them. Make sure to leave a 5mm gap
between the bolt and the panel. Then hang the
left side shelf assembly (I) onto the bolts and
tighten the two bolts.
Attach the left side shelf assembly (I) to the
left side shelf front assembly (J) with one
M4x12 bolt (BB).
Hardware Used
BB M4x12 Bolt
7
x 8
T
8
x 3
10
J
I
BB
BB
V