Parts; Assembly - Truper TAL-1/2N Manual De Instrucciones

Parts

Depth
control rod
Chuck
Continuous
Rotation
operation button
selecting
button
Auxiliary
Handle
handle
Switch
Power
cord protector
Power
feed cable
Chuck
wrench

Assembly

1. Turn the auxiliary handle in a
Depth
clockwise direction while released
control rod
so that the opening in the mount
3
gets through freely over the chuck.
2. Insert the drill head through the
auxiliary mount.
Steps
1 & 2
3. Insert the depth control rod into
the mount orifice.
4. Rotate the auxiliary handle
together with its mount until is set
in the right position to operate the
4
tool. The auxiliary mount is secure
Mount
when the handle notches assemble
in the gearbox.
5. Turn the auxiliary handle to
firmly set the mount onto the drill
head.
Auxiliary
handle
5
6
ENGLISH