Replacing Lamps - Hotpoint Ariston HDAI Montaje Y Modo De Empleo

EN

Replacing lamps

Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they
are cooled down.
1. Using a flat head screwdriver or equivalent tool,
carefully pry loose the light cover.
2. Remove the damaged light and replace with a new
12 Volt, 20 Watt (Maximum) halogen light made for
a G-4 base SUITABLE FOR USE IN OPEN
LUMINAIRES. Follow package directions and do
not touch new light with bare hands.
3. Reinstall the light cover. (it will snap shut).
34