CAME MI6030 Manual De Instrucciones página 39

MOBILE DOORS:
- Resize the length of the upright and cross sections according to the size of the sections used-
follow indications on pages 12/13.
- Fasten the elements that make up the antipanic system for mobile doors.
- If necessary, insert the "wheel" device (art. P4173). See pg. 18.
ANTIPANIC BAR
- Cut sections PM339A and PM338A and chamfer and bore holes in section PM338A as
indicated on page 22.
- Apply the bar on the mobile door, mount the spiral cable and finish mounting the doors on the
Corsa or Rodeo beam, adapting the instructions for the S40 series on pages 24-26.
- Carry out the power connections and checks as indicated on page 27.
MAKE SURE THE BREAKTHROUGH SIDE IS THE CORRECT ONE AND THAT THE ANTIPANIC SYSTEM FOR
MOBILE DOORS IS COMPLETE BEFORE PERFORMING ANY MACHINING WORK!
COMMERCIAL SERIES mounting instructions COMMERCIAL SERIES mounting instructions COMMERCIAL SERIES mounting instructions COMMERCIAL SERIES mounting instructions COMMERCIAL SERIES mounting instructions
- pg. 11 -