Publicidad
Idiomas disponibles
Idiomas disponibles
®
Sistemi Elettronici
di Aper tura Porte e Cancelli
(*) Note
The main code is printed on an adhesive label included in the package. It is advisable to store it in a safe place or stick it on the
board of the electronic control panel of the automation since it is one number only.
MODIFYING THE ACCESS CODE
-
Type the main code followed by button E (see note).
A two second lasting sound will be heard if the code is correct.
-
Type the so far used code followed by E.
Another long sound will be heard.
-
Type the new access number (maximum of 8 digits).
A new sound like the previous one will be heard so to inform the user that the new code has been memorised.
-
Check that the automation works by dialling the new code.
SAFETY PRECAUTIONS
All electrical installation work should conform to current regulations. All low voltage controls (push button, photocell, radio etc.)
cables should be run in separate ducts to the mains to prevent from mains interference.
SPARE PARTS
To obtain spare parts contact: SEA s.r.l. – ZONA Ind.le, 64020 S.ATTO – Teramo – Italia.
INTENDED USE
The 23105166 electronic device has been designed to be solely used as control unit for the automation of sliding gates.
SAFETY AND ENVIRONMENTAL COMPATIBILITY
We recommend not to spoil the environment with product and circuit packing material.
CONFORMITY REQUIREMENTS
The 23105166 electronic device conforms to the following:
•
1999/5/CE Regulation (R&TTE)
•
ETS 300 683 , ETS 300 220
•
EN 60065
STORAGE
T
min
-40 °C
When being transported this product must be properly packaged and handled with care.
MAINTENANCE AND OUT OF SERVICE
The decommission and maintenance of this unit must only be carried out by specialised and authorised personnel.
LIMIT OF GUARANTEE
The 23105166 electronic device is guaranteed for a period of 24 months. The guarantee period starts from the date stamp
printed on the unit. The guarantee will be void if the unit has been incorrectly installed, not used for the purpose intended,
tampered with or modified in any way.
The validity of this guarantee only extends to the original purchaser of the unit.
NOTE: THE MANUFACTURER CAN NOT BE DEEMED RESPONSIBLE FOR ANY DAMAGE OR INJURY CAUSED BY
IMPROPER USE OF THIS PRODUCT.
SEA reserves the right to do changes or variations that it considers necessary to its products with no obligation to notice.
Cod. 67410515
SEA S.r.l. Zona Ind.le S. Atto – Teramo – Italia
Sito Internet:
http://www.seateam.com
E-mail:
seacom@seateam.com
STORAGE TEMPERATURES
T
max
+85 °C
Rev. 01 , 10/2008
(Uff. Comm.le)
seatec@seateam.com
Humidity
min
5% no condensation
(Uff. Tecnico)
Humidity
max
90% no condensation
Pagina 0 di 16
Publicidad
