Getting Ready - Bissell Big Green Complete 7700 Serie Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

S
pecial features
Cleaning tools (continued)
Multi-surface floor tool: may be used
on both carpet/rugs or hard floor surfaces.
for use on carpets, make sure the tab is in
the down position
the soft outer brushes. for hard floor surfaces,
press the opposite tab in the down position
. this will engage the soft outer brushes.
Crevice tool: may be used for both dry
vacuuming or wet cleaning.
NOTE: In wet cleaning mode the crevice
tool will spray water and cleaning solution.
Take care not to press the trigger when in
water filtrated vacuum mode.
Quick Release™ Hose Door
the handy Quick Release™ hose door ensures
that the machine's hose never rests on your
carpet or hard floors, keeping them clean and
dry while filling or emptying the tanks.
Wand caddy
Perfect for storage or when you take a break
from cleaning, the wand caddy holds the grip,
wands and tools firmly in place.
O
perations
Vacuuming

Getting ready

in order to maximize the cleaning and filtration
power of the big green complete make sure
there is always water in the collection tank.
fill with clean tap water up to the tank fill line.
Vacuuming without water in the collection tank
will require more frequent washing of the filters
to prevent build up of dust and other particles,
which may cause damage to the motor.
1. if desired, make sure the tool caddy is in
the back of the machine. store appropriate
vacuuming tools as needed.
2. attach desired tool to end of wand (or
directly to grip).
3. Remove the collection tank from the unit by
opening the Quick Release hose door and
lifting the tank straight up by the handle.
8
w w w . b i s s e l l . c o m
. this will hide
3
8 0 0 . 2 3 7 . 7 6 9 1

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido