Emptying The Collection Tank; Wet Cleaning - Bissell Big Green Complete 7700 Serie Guia Del Usuario

O
perations
Getting ready (continued)
4. Remove the top lid from the collection
tank and set aside.
5. fill the collection tank to the fill line
(located on side of tank) with clean,
cold water.
6. Replace the top lid back onto the top
of the collection tank.
7. set the collection tank back in the
machine.
8. select "WateR filteR Vacuum" with
the mode selector.
9. close the Quick Release hose door tightly
until it clicks into the locked position.
10. Plug into a proper outlet and press
the on/off button down into the
on position.

Emptying the collection tank

1. open the Quick Release™ hose door
and remove the collection tank by lifting
straight up with the tank handle.
2. Remove the top lid from the collection
tank and set it aside.
3. empty dirty water into a sink or toilet,
or outside. Pour the dirty water out from
the corner of the tank. Rinse out the tank
thoroughly.
4. Refill the tank if needed and replace
the top lid back onto the top of the
collection tank.
5. set the collection tank back in the
machine.
6. close the Quick Release hose door
tightly until it clicks into locked position.
7. if finished vacuuming, refer to the
maintenance and care section starting
on page 14.

Wet cleaning

Before you clean
1. Plan activities to give your carpets
time to dry.
2. thoroughly dry vacuum the area to
be cleaned.
3. Plan your cleaning route to leave an
exit path. it is best to begin cleaning
in the corner farthest from your exit.
w w w . b i s s e l l . c o m
4
6
8
8 0 0 . 2 3 7 . 7 6 9 1
5
7
9