Clock; Timer - Philips MZ-3 Manual De Instrucciones

Using the Sound Control
You can also adjust the sound settings exclusively on the
set:
1 Press SOUND CONTROL once or more to select the
various options:
• once:
display shows DBB OFF;
if DBB is activated, display shows DBB ON and
,
DBB
• twice:
display shows DSC status OPTIMAL.
(display shows JAZZ, POP, or CLASSIC and the
respective , or symbol if selected)
• three times:
display shows Incredible Surround (IS) status
IS OFF.
if IS is activated, display shows IS ON and
.
2 For each sound setting, turn the VOLUME control in any
direction to select ON, OFF or DSC options.
3 Press SOUND CONTROL again to confirm.
• Display shows the next sound setting to the adjusted.
• After the IS setting is confirmed,the display shows
the volume level VOL briefly, before returning to the
current playback display.
Demo mode
• In standby, press 9 on the set for more than 5 seconds.
™ Demo messages scroll continuously across the
display.
• Repeat step to deactivate.
™ DEMO OFF scrolls across the display.

CLOCK

MC 158 COM MC 158 COM
PAC T AUD PAC T AUD
IO IO IO SYS TEM IO SYS TEM
IO IO
IO IO
II II
IO IO
II II
IO IO
II II
IO IO
IO IO
I II I II
Setting the clock
1 In standby, press CLOCK.
™ The clock digits for the hours and the AM/PM
indication flash 0:00.
2 Turn VOLUME to set the hours: clockwise for hours up;
anti-clockwise for hours down.
3 Press CLOCK again.
™ The clock digits for the minutes and the AM/PM
indication flash 0:00.
4 Turn VOLUME to set the minutes: clockwise for minutes
up; anti-clockwise for minutes down.
5 Press CLOCK to confirm the time.

TIMER

IO IO
IO IO
OPEN OPEN
CLOSE CLOSE
PRESET PRESET
IO IO
II II
TUNING TUNING
IO IO
II II
IO IO
II II
IO IO
IO IO
I I
Setting TIMER
• The unit can be used as an alarm clock, whereby the set
is switched on at a set time. The clock time needs to be
set first before the timer can be used.
• During setting, if more than 90 seconds elapses without
a button being pressed the unit quits the timer setting
mode.
1 Press PROGRAM on the set for 2 seconds or more in
standby mode.
™ Display shows TUNER or CD and ˚ flashes
™ Display shows SET CLOCK TIME if the clock has
not been set.
2 Turn VOLUME clockwise.
™ Display sequence shows CD, TUNER, CD...
3 Press PROGRAM (on the set) to confirm source.
™ Display shows ON 0:00, the clock digits for the
hours and the AM/PM indication flash; 0:00 flash.
4 Turn VOLUME to set the hours: clockwise for hours up;
anti-clockwise for hours down.
MC 158 CO MP MC 158 CO MP
AC T AU DIO AC T AU DIO
SY ST EM SY ST EM
O O
C C
PR PR
11