Palazzetti BELLA IDRO Uso Y Funciones página 26

5 FUNCTIONS
5.1 TIMER
The timer function allows you to manage start-up/shut-
down of the unit in automatic mode (for pre-selected days,
times and temperature range .
To access the timer menu, press the Menu button (
select the "clock symbol ( g. 4.1
In order to use the timer you must ( g. 4.2 :
1.
2.
3.
1.
Open the Timer Menu ( g. 4.2 :
• Press the key next to the temperature symbol ( g. 4.2 -
• Select one of the three displayed temperature ranges by
pressing the button next to the "
• Adjust the selected temperature modes using the arrow
buttons ( g. 4.3
• Con rm your selection using the "back button ( g. 4.3
It is important that you set the ranges in an ascending manner
(the rst must be lower than the second and so on so forth .
2.
Open the Timer Menu ( g. 4.2 and press the button next to
the "calendar symbol ( g. 4.2
A screen ( g. 4.4 will appear displaying the following
information:
• Date, time and temperature
• A chart with the selected temperatures for a given day
• The "set temperature symbol (
• The symbol representing the program for the following
day (
• The " button for scrolling through the subsequent
hours at 30 minute intervals (
• The "back button (
returning to the previous screen.
• Select the time by pressing the button next to the "
symbol (
• Assign a temperature to the selected time using the
button next to the temperature symbol (
choose from the set temperature ranges or select the
OFF function. Three bars in ascending order from zero
to three (depending on your selection will appear on the
screen.
• To switch to the next day, press the button next to the
"calendar symbol (
.
symbol ( g. 4.3
-
.
for con rming the program and
and
: you can
26
g. 5.1
g. 5.2
g. 5.3
g. 5.4