Names And Functions Of Parts - Kenwood DRV-410 Manual De Instrucciones

Names and Functions of Parts

1
2
Bracket attachment part
1
Attach the supplied mount bracket.
Camera lens
2
Speaker
3
Outputs voice guidance, warning sounds, and
file playback audio.
Power cord connector terminal
4
Connect the supplied cigarette lighter plug
cord or the Dashboard Camera power cable.
J button
5
• Press this button during playback to play the
previous file.
• Hold down this button during playback to
rewind, and hold it down while playback is
paused to play slowly in the reverse direction.
Release this button during rewinding to play, and
release it during reverse slow playback to pause.
• Press this button during menu display to
return to the previous item.
MENU/OK button
6
• Hold down this button to turn on or off the
power of the device.
• Press this button to display the MENU screen.
• This button functions as the OK button
during menu display.
• Hold down this button for at least 25
seconds to reset the device.
Microphone
7
Records audio.
5
6
7
8
3
!
4
K button
8
• Press this button dur ing continuous
recording to take a photo.
• Press this button during playback to play the
next file.
• Hold down this button during playback
to fast-forward, and hold it down while
playback is paused to play slowly in the
forward direction. Release this button during
fast-forwarding to play, and release it during
forward slow playback to pause.
• Press this button during menu display to go
to the next item.
Monitor screen
9
SD card slot
0
Insert an SD card for recording.
Indicator
!
Lights when the power of the device turns on.
@
• Press this button dur ing continuous
recording to start manual recording.
• Each press of this button during playback
switches between the paused and playback
states.
• Press and hold this button during playback
or menu setting to return to continuous
recording.
• This button functions as the cancel, back, or
exit button during menu display.
9
@
button
0
11