Erasing Memory Values; Data Transfer And Analysis Via Desktop 2.0 Software - GERATHERM desktop 2.0 Instrucciones De Uso

Operations

Erasing Memory Values

You may erase one or all memory values.
Erasing one memory value
1. Press the MEMORY GROUP button to choose the
desired memory group.
2. Press and release MEMORY to display the mem-
ory values. Press and release MEMORY again to
choose the memory value that you wish to erase.
3. Press and hold the START button until the display
shows "dEL".
4. Press and release the START button again. The
unit erases the memory value after the third beep.
Erasing all memory values
1. Press the MEMORY GROUP button to choose the
desired memory group.
EN
2. Press and release MEMORY to display the memory
values.
3. Press and hold the START button until the display
shows "dEL".
4. Press MEMORY and display shows "dEL ALL".
5. Press and hold START. The unit erases all memory
values after the third beep.

Data Transfer and Analysis via desktop 2.0 Software

The software and the instructions you will fi nd on our
homepage via the following link:
http://geratherm.de/diagnostik/downloadbereich/
44