Inserting/changing batteries
For use, you require 2 batteries of type LR03 (AAA),
1.5 V (included).
1. Open the battery compartment on the rear
side.
2. Insert the batteries as shown on the base of
the battery compartment. Pay attention to the
correct polarity (+/-).
3. Close the battery compartment again.
Suggestions for changing the battery:
The batteries must be changed when nothing
is shown on the display.
Only use the type of battery that is specified
in the "Technical Data".
Always exchange all of the batteries at the
same time.
Dispose of batteries in an environmentally
appropriate way (see "Disposal").
30
Digital thermometer/hygrometer WS 1831